Home ] About HPC ] Motorsports ] Aircraft ] Snowmobiles ] Industrial ] Events ] News ] Processing Form ] Contact Us ] Tell Us How We're Doing ]

 

S-Series Solid Dry Film Coatings

HPC offers a multitude of Solid Dry Film coatings specifically engineered to your coating requirements.  For applications requiring a reduced coefficient of friction, as well as non-stick, chemical resistance and food processing in various environments, the S-Series has the solutions to your needs.  Several of HPC's S-Series coatings are OEM specified.


S01: Wettable Matrix Coating

This inorganic single-bonded dry film contains a matrix selected to increase the lubricity and load-bearing capability when subjected to high pressure and mid-range temperatures.  It provides excellent wear properties while reducing friction loads. In applications where solutions such as petroleum products are to be retained rather than shed, this process will increase the life of the components by helping to eliminate fretting, galling and seizure.  A variety of colors are available.  Operating temperature: -100° F to +600° F (-73° C to +315° C).


S02: Non-Wettable Matrix Coating

Designed with PTFE, S02 provides outstanding chemical corrosion protection on ferrous and non-ferrous materials.  Dissimilar metal corrosion between tightly compressed components will be greatly reduced after being treated with S02.  Its non-wettable properties allow solutions to glide across the substrates rather than being absorbed and attack the substrate.  It's available in a variety of colors with operating temperatures up to 600° F (315° C).


S04: Non-Stick and Mold Release Coating

Mold release coatings are formulated with a thermoplastic resin, which adheres to metal components. It enhances the durability characteristics, while achieving an excellent non-stick coating. In conjunction with the release properties, the coatings exhibit exceptional resistance to many chemicals. Components coated with HPC S04 release coatings achieve as much as four times the life from a single application.

Parts may be new or used. Application may be made to parts which have previously been coated to increase the life of the part.

S04 coatings are recommended for use on, but not limited to, plastic molds, extrusion equipment, sealing bars (used in melting plastic film in packaging operations), and valves or processing equipment which require good chemical resistance, elevated temperatures and excellent release properties.

The coating is post-formable, can withstand up to 30% elongation and can operate at continuous temperatures of 400° F (200° C) with intermittent temperatures reaching 480° F (250° C).


S05: Non-Wettable Matrix Coating

HPC S05 is a very highly bonded resin with PTFE as a lubricant. S05 is recommended in high-speed applications where a harder surface coating is required for increased durability. S05 has shown excellent resistance to chemicals and corrosive agents.

S09: Non-Wettable Matrix Coating

This coating is similar to S02, however PTFE to bonding resin ratios have been altered to produce a coating which is harder, more abrasion resistant, glossier and less porous.  Release properties remain very good and chemical and UV resistance is exceptional. S09 is available in a variety of colors.


 

For more information E-mail our Tech Department or call us at (800)456-4721.

 

Copyright ©2005 High Performance Coatings, Inc. All rights reserved.
Terms of Use